## Onshape Link https://cad.onshape.com/documents/159aeab6477d18548056b5ce/w/242a61f8f6fd677d628ed187/e/e82454ef8ff047eed678cdf4?renderMode=0&uiState=654b2b720db1d018dc58ddfc ## Panel edges Design features: - Chaseway for framing the twinwall polycarbonate - Chaseway for wires, twisted LED strands - Holes for mounting to the dome via 9" bungee balls (3/8 in. minimum diameter) Questions: - Joinery? ![[Pasted image 20231107221753.png]] ![[Pasted image 20231107215416.png]] ## Assembly ![[Pasted image 20231108175550.png]] ![[Pasted image 20231108175628.png]] ## Alternatives This is written thinking we'd make 1 Base (single) and 2 Left/right pieces. However, another idea I had is that we could make 3 Base (symmetrical) pieces; constructing these would be identical. The problem with this design is that the bottom edge needs to expose the wire chaseway, but it gets blocked by the left/right side. So this would require some extra cuts on the left/right side to make it work. ![[Pasted image 20231107222907.png]]